Congratulations on your choice of the Bronica SQ-A single lens reflex Although instructions following are based on a standard combination consisting of the. View and Download BRONICA SQ-A manual online. SQ-A Digital Camera pdf manual download. View and Download Zenza Bronica SQ-A instructions manual online. Zenza Bronica SQ-A Single lens Reflex Camera. SQ-A Film Camera pdf manual download.
|Published (Last):||20 May 2018|
|PDF File Size:||19.22 Mb|
|ePub File Size:||12.38 Mb|
|Price:||Free* [*Free Regsitration Required]|
The lens system has a Seiko manufactured electronic shutter with speed of 8 sec. The top one is for the fresh film spool aq-a the bottom one is for the empty take-up spool. Lens mount Exclusive four-claw Bronica SQ bayonet mount.
The battery supplies power for the various electronic control mechanisms incorporated in the Zenza Bronica SQ-A.
However, it will be possible to rotate the manual film winder and, therefore, it should be rotated 2 or 3 times more, in order to take up any slack in the loaded film. It is sometimes called SQ Basic.
The accessory shoe is a hot shoe type which means that electronic flash units with prop er terminals can be used with out connecting cords. Mirror lock-up possible with the mirror lock-up switch lever on the camera manuxl body, with.
Bronica SQ A instruction manual, user manual, PDF manual, free manuals
Double exposure can be prevented, in the above case, by the following methods. The film back consists of a film holder and a film back frame, with exclusive film backs available mnual and roll films. Plugs used for transistor radios and tape recorders are acceptable. This makes it much easier to view and change the ISO settings with larger finders.
The shutter will be mechanically C continuous – For shooting continuously with mirror lock-up. The sync connector is located on the front of the camera by the lens mount. When set to OFF, all power is switched OFF and auto winding, lens shutter operation and the built-in exposure meter of attached finders will not function. Does not have bulb mode, since the SQ-A did not have it either.
Bronica SQ-A Instruction Manual
The 16 second and bulb modes does not work with the ME or MF finders. The battery holder must be left inside the battery chamber even when taking power from an external source. When multiple exposure mode is enabled, the right of the viewfinder now displays an square indicator. Attach the film back after motor operations take place and is suspended.
Lens is not attached properly. The main film crank can be removed to attach a winder or speed grip. To make up multiple exposures, rotate the film winding crank to advance the film and cock the shutter and then turn the multiple exposure lever in the clockwise or arrow-indicated direction, which will expose a red mark. Unscrew the set screw on the time exposure mabual until manula rev- olution is Zenzanon-S Variogon mm F4.
The backs changed slightly, with the ISO dial on the back instead of the top. Then, using a pincer or similar tool, lift up the screen with the protrusion at the rear end. It was made inmaking ,anual the newest camera in the SQ line. I n other words, when “cocked” the cocking pin of the lens will be set between the red band and green dot, while the cocking pin of the body mount will be set to the green colored dot. To remove the film back from the camera main body, insert the dark slide into the dark slide slit, as illustrated, with the O mark on the dark slide at the top end.
Insert the leading end into the slit of the take-up spool and wind slightly until securely engaged. However, always check operation of the equipment before actual use. First, insert the U-shaped ring into the neck strap eyelet, as illustrated.
The use of the multiple exposure lever will, however, permit you to cock the shutter, in such instances. The surrounding full-area matte surface can also be used for checking image manuak. However, since the film will not be advanced to the next frame, in this case depress the drive button to advance the film.
Therefore, sq-s rotating the film-winding crank until the remaining film and all leader paper is wound up on the take-up spool. Film Type Indicator Frame Upon loading the film, tear off the end flap from the empty film pack- age and insert it in the film type indicator frame. Cover the lens and take one blank exposure, as follows: